Installing the Caddy

Horses can wreak havoc on stall walls when bored, irritated, or under exercise. Kicking at stall walls can break or knock down boards, damage the wall, and possibly cause injury.

The stall walls should be four feet high and made of rough-sawn lumber or 5/8-inch thick rubber mats. They can also be lined with sheet metal.

Stall fronts and side panels may be joined to form a single unit if desired. It may vary if a door is provided between stalls or a door to the outside is added.

You can use standard lumber to build a stall or, in some cases, laminate several sheets of plywood to get a total of 1.5″ thickness. Even though it costs more than dimensional lumber, this is an excellent alternative if you have a lot of plywood or use an old, unused board.

For stall partitions and end panels, header boards should be as long as the center-to-center spacing (to provide adequate overlap for vital screw locations), and they should touch at junctions between stall fronts and stall backs.

Using the Caddy

This handy multi-compartment wall caddy provides a space for all your most commonly used cleaning supplies. From sanitizing spray bottles to cleaning sponges and nail files, it’s all neatly stored in compartments made from steel and silicone.

Typical horse stalls consist of one stall front (distinguished by the provision of a door) and three stall side panels without doors. However, this configuration may vary if a door between stalls or a door to the outside is provided.

Generally, the stall front is constructed the same way as the rest of the stall, using a header board to hang the track for a sliding door and door hangers. A “door post” that defines the door opening is sometimes included as part of the stall front construction.

Adjusting the Caddy

Before installing the wall caddy, you must ensure it is correctly positioned. Use a level to ensure it is dead on, then secure it using the provided screws.

Next, you need to clean up the stall. Take the time to dust off the dividers and walls, replace any dirty bedding with fresh ones and wipe down any rubber mats you have in the stall.

Finally, check out your horse’s water and feed buckets for stains and odors. Remove all the old water and food, wash out the insides of both containers and fill them with fresh, clean water and hay.

Once you’ve finished cleaning, you can put your horse back in the stall and enjoy his new digs! Adding toys to entertain your horse during his time in the stall is a good idea. The best ones are hung on a ring or loop to prevent them from getting lost in the booth.

Cleaning the Caddy

Every horse owner will agree that keeping their stalls clean and tidy is critical to caring for their animals. Stall cleaning doesn’t have to be difficult, and it’s a chore you can do quickly and efficiently if you use the right tools.

1.) Gather the right tools

Ensure you have everything you need to complete the task before you begin. These tools include a pitchfork, shovel, broom, and gloves.

2.) Take your horse out of the stall

Removing your horse from his stall during this process is best so he doesn’t become distracted or intrude on your work area. Also, remove his toys, water, and feed tubs from the stall so you’re not exposing them to potentially hazardous materials or putting them in the way of your work.

3.) Clean the stall

Once you’ve cleaned your stall, spread fresh bedding over it to create a nice layer for your horse. The type of floor under your booth and the time of year will determine how much bedding you require.